MOTO GUZZI BREVA V750 IE Informations techniques télécharger pdf (Page 20)

www.motoguzzi.it

TECHNICAL INFORMATION No. 03-2003 June 12

2003

Object: Clutch

Model: All versions of the California

To whom it may concern,

This is to inform you that a clutch set with a single sintered disc was assembled on all the

California motorcycles models produced from September on.

Also, on all motorcycles with sintered single disc clutch, which are recognizable from a lower

load on the handlebar lever, be certain to check more frequently the clearance on the lever, in

as much as in the initial using period, it is possible that the clearance void itself with the result

that the clutch sticks and, therefore, become irreparably ruined.

Be reminded as well that work can be performed on the handlebar adjuster, on the adjuster at

the end of the cable as well as on the clutch lever assembled on the gear cover.

Note, finally, that a percentage of clutches may show some abnormal wearing phenomena due

to the material’s defect. In such a case, you may request a warranty covered work to substitute

the complete set with a dual disc set.

For your convenience, we add the ordering codes list as well as the operation code to insert in

the system:

code q.ty

motor flywheel 03067030 1

crown gear 17067900 1

screws 98084420 8

screws 12067701 6

flat washer 14615901 18

clutch disc 03084400 2

intermediate disc 12082300 1

cup 12082800 1

spring retaining plate 12082901 1

clutch spring 13084100 8

gear 30081810 1

The code to use for the warranty request in A2D is AF 209 MD01 (6,2 hours)

After inserting the MD code, the system will ask you for the note, at which point you will need to

provide the “Technical Information Reference03-2003 ” note.

Sincerely yours

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 38 39

Pas de commentaire

MOTO GUZZI BREVA V750 IE Informations techniques Page 20