MOTO GUZZI V750 IE Informations techniques télécharger pdf (Page 71)

use and maintenance Breva

Check the auxiliary fuses first and then the

main fuses.

For the check, proceed as follows:

u Set the ignition switch to " " to avoid

an accidental short circuit.

u Remove the rider seat, see page 21

(UNLOCKING/LOCKING THE SEAT).

u Remove the side body panels, see page

57 (REMOVING THE SIDE BODY

PANELS).

u Open the cover of the auxiliary fuse box

(1).

u Extract and check the fuses one by one -

a divided link bar (2) means that the fuse

is blown.

u Before replacing a fuse, try to find out

the cause of the trouble, if possible.

u Replace the damaged fuse with a new

one having the same amperage.

NOTE If you use one of the spare fuses,

put a new fuse in the proper seat.

u Repeat the above operations for the

main fuses.

NOTE Removing the 30A fuses resets

the digital clock.

For setting instructions, see page 16

(MULTIFUNCTION DIGITAL DISPLAY).

ARRANGEMENT OF AUXILIARY FUSES

a) From key to safety lockout

system/starting (10 A).

b) From key to lights, stop light, horn, and

turn indicators (15 A).

c) From battery to fuel injection permanent

power supply (3A).

d) From battery to fuel injection (15A).

e) Spare

NOTE There are three spare fuses (3,

10, 15 A).

DB C

GUZum_breva750my06_##uk.book Page 71 Monday, May 15, 2006 1:44 PM

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 87 88

Pas de commentaire

MOTO GUZZI V750 IE Informations techniques Page 71