MOTO GUZZI V750 IE Informations techniques télécharger pdf (Page 73)

use and maintenance Breva

BEAM HORIZONTAL ADJUSTMENT

u Place the vehicle on the stand, see page

46 (PUTTING THE VEHICLE ON THE

STAND).

u Turn the screw (2) using a screwdriver

until obtaining the desired beam setting.

After the adjustment:

WARNING

Make sure that the vertical adjustment

of the headlight beam is correct.

BULBS

Carefully read page 48

(MAINTENANCE).

WARNING

Risk of fire.

Keep fuel and other flammable

substances away from the electrical

components.

CAUTION

Before changing a bulb, move the

ignition switch to position “” and wait

a few minutes, so that the bulb cools

down.

Change the bulb wearing clean gloves

or using a clean and dry cloth.

Do not leave fingerprints on the bulb,

since these may cause its overheating

and consequent breakage.

If you touch the bulb with bare hands,

remove any fingerprint with alcohol, in

order to avoid any damage.

DO NOT FORCE THE ELECTRIC

CABLES.

NOTE Before changing a bulb, check

the fuses, see page 70 (CHANGING THE

FUSES).

PUSH

GUZum_breva750my06_##uk.book Page 73 Monday, May 15, 2006 1:44 PM

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 87 88

Pas de commentaire

MOTO GUZZI V750 IE Informations techniques Page 73